Cookie Img
Home » Products » Thruster Brakes » Industrial Electro Hydraulic Thruster

Industrial Electro Hydraulic Thruster

Industrial Electro Hydraulic Thruster
Industrial Electro Hydraulic Thruster
Product Code : ED
Brand Name : HMIC
Product Description

Industrial Electro Hydraulic Thruster

 

Use conditions

  • Ambient temperature; -20℃~50 using DB-25 hydraulic oil,lower than-20 with YH-10aviation hydraulic oils,not mounted heaters;using DB-25 hydraulic oil must be retorfitted with heaters.
  • Continuous service S1,internittent work S3-60%.
  • Voltage and frequency three-phase AC 380v/50(60)Hz,Ican also provide different frequency,different voltage product,need consultation when you order.
  • The three-phase AC asynchronous motor ,with (GB755-2000)regulations ,performance as technical data.
  • Insulation class:classF,electrical protection grade:IP65.
  • Cable:cable conductor cross sertions up to 4*2.5mm2.
  • High performance corrosion protection products used for corrosive media and high relative humidity in the air ,and thus may generatecodensate,Stator of motor adopts vacopts note new moon.paint using a special anti _corrosion paint products corrosion can provide corrosion products, users need to contact the company.

 

Choice of installation methods

  • Vertical installation :connecting  rod on top of the piston rod;
  • Horizontal installation and anywhere  in the middle;

Additional devices

  • According to user needs to install additional equipment to meet different needs;
  • Increased or decreased valves:invreased retrofit by valve hdropped valvesor increase of dropped valveh,scan rise fall time continuously ectended,you can adjust the maximun values of up to 10-20times the rated value,the valve adjustment.propulsion system with valve(valve when fully opened)extended their rise fall time ,short-stroke extension of 0.1-0.2 seconds;long-stroke ectension 0.2-0.4 seconds;
  • Brake spring(C-spring)it products brake,brake spring force values for columns in the technical parameters for increased stroke ont –third (down stroke of two-third).the spring force;
  • Reset spring:how it works with the C-spring ,but less spring force to reset;
  • Buffer spring(d-spring)and the buffer spring (only applicable for short stroke drive),mainly adjusts the braking process.Buffer braking non-periodic transient process.so that the sommth braking ,it instead of push rod connecting rod arranged on the piston rod,without changing the drive travel.(note:d-installed spring can not install trip swich and should be and C spring supporting the use of );
  • Eater:in areas where ambient temperature lower than-20,according to the user needs the installation of heaters,heaters for AC200v,voltage of AV110v,indicate when ording,temperature control method is used by the users own choice;
  • Limit swich:according to the user request,a propulsion system can be mounted with mechanical limit switch or proximity switches.

Main characteristics

  • The piston rod adopts adopts protective measures can reduce wear and corrosion,a double-layer sealing.hydraulic system oil chamber is sealed by a double sealing ring,thus greatly improving service life of
  • The additional device see schedule.

HENAN MODERN INDUSTRIAL CO., LIMITED

Contact Us

( *represents compulsory fields )

Tips on getting accurate quotes. Please include product name, order quantity, usage, special requests if any in your inquiry.



HENAN MODERN INDUSTRIAL CO.,LIMITED All Rights Reserved.